There is an error in the smart detection

by P. Henderson
(Birmingham England)

When starting acer PC BIOS list comes up and says there is a error in the smart detection press F1 to continue or delete to enter setup. If I press F1 it continues to the home screen but no applications appear and the screen just flashes every couple of seconds; tried everything to stop it but can only turn off the pc.

Comments for There is an error in the smart detection

Click here to add your own comments

There is a error in the smart detection
by: Remus

Hello,

everything what you have said here indicates a problem with a hard disk drive, with cables that connect the hard disk drive or the BIOS.

You need to get into the PC's inside and check that the hard disk drive is properly connected to the motherboard and to the power supply; and is not overheating.

If this does not help you could check the hard disk drive (HDD) with another computer using SATA to USB adapter.

May be its just a simple glitch. Disconnect the PC from mains, press the power on button and hold it for a few moments. This will clear all the static and hopefully the system will boot again.


Click here to add your own comments

Open your ticket in Free Tech Support.

What Do You Want To Read Next. Write Me A Message.


Tell Me About Your Problem By Clicking Here. I Will Reply In Two Hours With A Solution.
We Sell Windows 10 Home and Pro 32/64 bit Factory Reset, Reinstall, and Restore USB Flash Drives For Laptops And Desktop Computers.


Kindle book